24V Non-Spring Return Foot Mounted Actuator, 150 lb-in

Series 90 Modutrol IV motors non-spring return modulating proportional control motors used with controllers that provide a Series 90 output to operate dampers or valves. Features Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position. Motor and circuitry operate from 24 Vac. Quick-connect terminals are standard--screw terminal adapter is available. Adapter bracket for matching shaft height of older motors is available. Motors have field adjustable stroke (90 to 160 degrees). Integral auxiliary switches are available factory mounted, or can be field added. All models have dual shafts (slotted and tapped on both ends). All models have auxiliary switch cams. Fixed torque throughout the entire voltage range. SpecificationsApplication Type: Electric Fail Safe Mode: Non-Spring Return Control Signal: Proportional, 135 ohmFeedback: noMotor Shaft: Dual ended ShaftStroke: Adjustable; 90 to 160 degrees, Symmetrical Torque Rating (lb-in.): 150 lb-in External Auxiliary Switches Available: Yes Frequency: 50 Hz, 60 Hz Power Consumption Driving (VA): 15 VA Electrical Connections: Quick Connect Terminals Shaft Dimensions (in.): .375 inShaft Shape: SquareMounting: foot-mountedDimensions: 6 7/16 in. high x 5 1/2 in. wide x 8 3/4 in. deepTemperature Range: -40 to 150F Deadweight Load on Shaft (Either End) (lb): 200 lbs Deadweight Load on Shaft (Combined on both shafts) (lb): 300 lbs Nominal Timing (sec): 30-60 sec Shaft Rotation (upon control signal increase): Clockwise (as viewed from power end) (normally closed) Auxiliary Switch Ratings AFL - 120 Vac: 7.2A Auxiliary Switch Ratings AFL - 240 Vac: 3.6A Auxiliary Switch Ratings ALR- 120 Vac: 43.2A Auxiliary Switch Ratings ALR- 240 Vac: 21.6ASuggested Transformers (Not Included): 50017460-001 or 50017460-003